Quick Search

Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.

Numerical Computation of Two-Phase Flow in Porous Media

D. Droste[1], F. Lindner[1], C. Mundt[1], M. Pfitzner[1]
[1]Universität der Bundeswehr, Munich, Bavaria, Germany

In this study we investigate the heat and mass transfer in a porous media with phase change. The liquid fluid is injected from one side and heated from the other side, where it leaves the porous material in a gaseous state. Dominant forces are capillary interactions and two-phase heat conduction. To model the process we use a two-phase mixture model on a macroscopic scale. This model is ...

Modeling Residual Stresses in Arc Welding

F. Roger[1], and A. Traidia[2]
[1]ENSTA Paristech, Paris, France
[2]AREVA NP, Saint Marcel, France

The prediction of mechanical response of assemblies during arc welding necessitates the knowledge of thermal history of the components and the constitutive behavior of the materials. COMSOL can simulate thermal and structural interaction but it needs to evaluate the time evolution of internal variables like viscoplastic strain and hardening parameters. In the present paper we extend the ...

Modeling a Combined Photovoltaic-Thermal Panel

E. Gutierrez-Miravete[1], B. Fontenault[2]
[1]Rensselaer Polytechnic Institute, Hartford, CT, USA
[2]General Dynamics-Electric Boat, Groton, CT, USA

A novel combined photovoltaic-thermal panel can simultaneously increase the conversion efficiency of the PV cell and utilize some of the excess thermal energy created by the conversion process (see Figure 1). The Conjugate Heat Transfer physics in COMSOL was used to create a two-dimensional, steady state model of such a combined photovoltaic cell-thermal panel. Figure 2 shows a magnified view of ...

Heat Transfer in Borehole Heat Exchangers from Laminar to Turbulent Conditions - new

E. Holzbecher[1], H. Räuschel[1]
[1]Georg-August Universität Göttingen, Göttingen, Germany

Borehole heat exchangers (BHE) in connection with heat pumps and floor heating in many countries are becoming an alternative to conventional heating or cooling systems using fossil resources. We describe how 1D components for heat transport in pipes can be coupled with a 2D or 3D component for the ground. Thermal conductances are derived for laminar, transitory and turbulent flow conditions in ...

Numerical Study of a High Temperature Latent Heat Storage (200-300oC) Using Eutectic Nitrate Salt of Sodium Nitrate and Potassium Nitrate

C.W. Foong, J.E. Hustad, J. Løvseth, and O.J. Nydal
Department of Energy and Process Engineering, Norwegian University of Science and Technology, Trondheim, Norway

In this study, a small scale direct solar thermal energy storage system with secondary reflector is designed and developed. The main advantage of thermal energy storage is that cooking can be carried out during the time when there is little or no sun shine. In addition, no heat transport fluid is needed in this system. A well insulated heat storage should keep the heat for about 24 hours. KNO3 ...

Food Cooking Process. Numerical Simulation of the Transport Phenomena

B. Bisceglia[1], A. Brasiello[1], R. Pappacena[1], R. Vietri[1]
[1]University of Salerno, Department of Industrial Engineering, Fisciano (SA), Italy

Aim of the study is to determine the influence of some of the most important operating variables, especially humidity and temperature, of drying air on the performance of cooking process of pork meat. The process is simulated using finite elements software COMSOL Multiphysics®. The proposed model considers two geometries: cylindrical and parallelepiped, with fixed physical properties and ...

Multiscale Modeling of Polymer Crystallization

R. Spina[1], M. Spekowius[2], C. Hopmann[2]
[1]Dept. of Mechanics, Mathematics and Management (DMMM), Politecnico di Bari, Bari, Italy.
[2]Institute of Plastics Processing (IKV), RWTH Aachen, Aachen, Germany.

The manufacturing of high quality injection molded parts requires a deep understanding of material properties, process parameters and product design. The behavior of a polymer during the injection molding process and the performance of the final part are strongly determined by the material structure formed during filling and cooling. The main objective of the presented work is to describe the ...

Modeling of a Counter Flow Plate Fin Heat Exchanger - new

R. Jia[1], J. Hu[1], X. Xiong[2]
[1]Department of Mechanical Engineering, University of Bridgeport, Bridgeport, CT, USA
[2]Department of Electrical and Computer Engineering, University of Bridgeport, Bridgeport, CT, USA

Plate fin heat exchangers are widely used for heat recovery or cooling purposes in many industries, such as cryogenics, aerospace and automobile industries. This paper developed a numerical model to simulate the heat transfer and fluid flow in a counter flow plate fin heat exchanger and optimize its design parameters. The conjugate heat transfer in the finned plate and fluids in the channels ...

Dimensionless versus Dimensional Analysis in CFD and Heat Transfer

H. Dillon[1], A.F. Emery[1], A. Mescher[1], and R.J. Cochran[2]
[1]University of Washington, Seattle, WA, USA
[2]Applied CHT, Seattle, WA, USA

Students in engineering and science are often exposed early in their studies to non dimensional analysis. When it comes to solving fluid flow/heat transfer problems, many solutions, particularly industrial ones, are based on finite element/finite volume using dimensioned quantities. In order to compare to reference information one would like to use codes like COMSOL Multiphysics to solve non ...

Stefan's Problem: Validation of a One-Dimensional Solid-Liquid Phase Change Heat Transfer Process

D. Groulx, and W. Ogoh
Dalhousie University, Halifax, NS, Canada

A 1D phase change problem, known as Stefan’s problem, for which analytical solutions are available, is solved as a 2D problem using COMSOL Multiphysics. The PCM medium is semi-infinite, initially solid at its melting temperature Tm, and at t = 0, the wall temperature is raised to Tw > Tm, prompting the PCM to start melting, from pure conduction, in a linear fashion starting at x = 0. The length ...