G. Atmeh, F. Darwish, and Z. Hasan
Jordan University of Science and Technology, Irbid, Jordan
Texas A&M University, College Station, TX, USA
The present study focuses on the design and analysis of a single-engine, propeller-driven general aviation airplane. Initial weight estimation based on the initial sketch and the design mission profile is conducted. The estimated weight and other design parameters are used to define the external geometry of the fuselage, wing and tail. Conic lofting is utilized to render a layout of the design ...
J.S. Crompton, L.T. Gritter, S.Y. Yushanov, and K.C. Koppenhoefer
AltaSim Technologies LLC, Columbus, OH, USA
Analysis of burning candles is extremely complex; combustion produces a highly non-linear temperature profile through the flame in which local temperatures may exceed 1400 °C. Heat transfer includes radiation, conduction and convection components and the low melting point of the candle wax leads to a phase change that allows mass transport via capillary flow prior to combustion in the flame. ...
D. Groulx, and W. Ogoh
Dalhousie University, Halifax, NS, Canada
A 1D phase change problem, known as Stefan’s problem, for which analytical solutions are available, is solved as a 2D problem using COMSOL Multiphysics. The PCM medium is semi-infinite, initially solid at its melting temperature Tm, and at t = 0, the wall temperature is raised to Tw > Tm, prompting the PCM to start melting, from pure conduction, in a linear fashion starting at x = 0. The length ...
C. Van der Woude, and S. Narasimhan
University of Waterloo, Waterloo, ON, Canada
This paper presents a study of a wind turbine subjected to wind and seismic loading, carried out using COMSOL Multiphysics. The dynamic properties and response of wind turbine structures are of interest, as recent developments in wind energy have led to the design and construction of increasingly large and flexible turbine structures. A typical turbine structure model was created in ...
J.C. Olivares-Galvan, E. Campero-Littlewood,
R. Escarela-Perez, S. Magdaleno-Adame, and E. Blanco-Brisset
 Universidad Autonoma Metropolitana - Azcapotzalco, Mexico City, DF, Mexico
 Cipress No. 88, Col. Las Arboledas, La Piedad, MH, Mexico.
This paper analyzes different types of coil systems to produce volumes of uniform magnetic field. Some types of coil system are presented in this paper such as Helmholtz, Merritt, and Ruben coil systems. In the study coil systems are intended to produce a magnetic flux density of 2µT in the center of the coil. The calculation of the magnetic flux density is done with COMSOL using analytical ...
University of Miami, Miami, FL, USA
Insulin released by the beta-cells of pancreatic islets is the main regulator of glucose homeostasis, hence, insulin secretion models are of considerable interest for many possible applications. Building on our previous oxygen consumption and cell viability model for avascular islets of Langerhans, we developed an exploratory insulin secretion model that couples the hormone production rate to ...
F. Roger, and A. Traidia
ENSTA Paristech, Paris, France
AREVA NP, Saint Marcel, France
The prediction of mechanical response of assemblies during arc welding necessitates the knowledge of thermal history of the components and the constitutive behavior of the materials. COMSOL can simulate thermal and structural interaction but it needs to evaluate the time evolution of internal variables like viscoplastic strain and hardening parameters. In the present paper we extend the ...
Clemson University, Clemson, SC, USA
When a solid surface makes contact with a liquid medium, an electrical double layer (EDL) structure forms spontaneously through thermodynamic interaction between electrons and ions. In this study, we developed a computational model using commercial finite element analysis package COMSOL Multiphysics to simulate the double layer structure and quantify the EDL capacitance for the first time. In ...
H. Dillon, A.F. Emery, A. Mescher, and R.J. Cochran
University of Washington, Seattle, WA, USA
Applied CHT, Seattle, WA, USA
Students in engineering and science are often exposed early in their studies to non dimensional analysis. When it comes to solving fluid flow/heat transfer problems, many solutions, particularly industrial ones, are based on finite element/finite volume using dimensioned quantities. In order to compare to reference information one would like to use codes like COMSOL Multiphysics to solve non ...
J.S. Crompton, L.T. Gritter, S. Yushanov, K.C. Koppenhoefer, and D. Magyari
AltaSim Technologies, LLC, Columbus, OH, USA
Golden Acoustics, Detroit, MI, USA
The preferred acoustic response of recording studios, auditoriums and conference halls is to have an even energy response over the entire room and throughout full audio spectrum. This can be accomplished by using acoustic panels with complex surface structures that scatter acoustic waves and diffuse sound level variability over the room volume or through the use of sound absorbing materials to ...