Walter Frei | May 27, 2015
Whenever we are solving a wave electromagnetics problem in COMSOL Multiphysics, we build a model that is composed of domains and boundary conditions. Within the domains, we use various material models to represent a wide range of substances. However, from a mathematical point of view, all of these different materials end up being handled identically within the governing equation. Let’s take a look at these various material models and discuss when to use them.
Caty Fairclough | May 26, 2015
Cars have to exist in a variety of environmental conditions. They need to handle environmental changes such as temperature fluctuations. Therefore, it is important to create parts that can handle these conditions. An investigation into the functionality of an inductive position sensor was presented during the COMSOL Conference 2014 in Cambridge.
Bridget Cunningham | May 21, 2015
Truck-mounted cranes are designed to handle heavy loads. With this in mind, manufacturers and engineers look to optimize the machine’s payload, or carrying, capacity. Simulation apps can help expedite the optimization process by extending simulation capabilities into the hands of those who are not experts in simulation through a customized and intuitive interface. Our Truck Mounted Crane Analyzer demo app shows the benefits of this approach.
Mark Robins | May 19, 2015
In the science and engineering community, models are vital to design and development. But can models be protected by copyright law? Establishing the level of creativity required for copyright protection is relatively easy in comparison to patent law, which requires inventions to be novel and non-obvious. Additionally, copyright law does not require the secrecy measures needed to qualify for trade secret protection. We explore the appeal of using copyright to protect models and the functionality built around them.
Walter Frei | May 14, 2015
Metals are materials that are highly conductive and reflect an incident electromagnetic wave — light, microwaves, and radio waves — very well. When using the RF Module or the Wave Optics Module to simulate electromagnetics problems in the frequency domain, there are several options for modeling metallic objects. Here, we will look at the Impedance and Transition boundary conditions as well as the Perfect Electric Conductor boundary condition, offering guidance on when to use each one.
Ed Fontes | May 12, 2015
Biosensors are the workhorses of the analytical tools used for detailed mechanistic understanding at the molecular level of biological systems. The applications of these analysis tools are countless for the detection of biomolecules in the pharmaceutical, health care, and food industries; agriculture; environmental technologies; and in general for research of biological systems. The biosensor demo app is a good example of an application where non-experts can benefit from accurate multiphysics simulations.
Brianne Costa | May 25, 2015
Chemical vapor deposition (CVD) is popular in the semiconductor industry for its ability to produce high-quality, pure, and extremely strong materials. Ultra-high vacuum CVD (UHV/CVD) requires complex equipment and very high temperatures. To increase efficiency and control costs, engineers can simulate this complex process. Here, we use the growth of silicon wafers as an example.
Alon Grinenko | May 20, 2015
In an earlier blog post, we considered the computation of acoustic radiation force using a perturbation approach. This method has the advantage of being both robust and fast; however, it relies heavily on the theoretical evaluation of correct perturbation terms. The idea behind the method presented here is to solve the problem by deducing the radiation force from the solution of the full nonlinear set of Navier-Stokes equations, interacting with a solid, elastic microparticle.
Matt Pooley | May 18, 2015
Thanks to the Semiconductor Module and the Application Builder, developing custom optoelectronic simulation apps has never been easier. In this blog post, we show you how to turn a model of an LED device into a user-friendly application that can be used to assess the impact of different designs on the LED’s emission characteristics and performance. We also demonstrate the use of custom methods to manipulate the solution data, enabling the easy creation of bespoke analysis tools.
Brianne Costa | May 13, 2015
Piezoelectric valves are opened and closed by stacked piezoelectric actuators that are positioned above a seal. By applying a voltage to the stacked piezoelectric actuator, it can be made to expand or contract and the resulting deformation is used to open and close the valve. In this blog post, we feature a tutorial model of a stacked piezoelectric actuator in a pneumatic valve, new with COMSOL Multiphysics version 5.1.
Brianne Costa | May 11, 2015
Microfluidic biochips have a variety of applications and are valued for their low cost, fast response time, and high efficiency. In the paper “Design and Simulation of High-Throughput Microfluidic Droplet Dispenser for Lab-on-a-Chip Applications”, which was presented at the COMSOL Conference 2014 Boston, researchers designed a microfluidic biochip with an analog-to-digital converter. They used COMSOL Multiphysics software to understand the mechanism of the device and verify its function.